Artikel ; Online: Assessment of the trueness of additively manufactured mol3% zirconia crowns at different printing orientations with an industrial and desktop 3D printer compared to subtractive manufacturing.
2024 Band 144, Seite(n) 104942
Abstract: Objectives: This study endeavours to investigate the effect of printing orientation on the trueness of additively manufactured molar zirconia crowns. The areal surface roughness and the characteristics of the marginal regions of the crowns were also ... ...
Abstract | Objectives: This study endeavours to investigate the effect of printing orientation on the trueness of additively manufactured molar zirconia crowns. The areal surface roughness and the characteristics of the marginal regions of the crowns were also considered. Methods: Twelve molar crowns were manufactured at 0°, 45°, and, 90° printing orientations in a Lithoz and AON zirconia printer, respectively. Twelve milled crowns were used as a comparison. Samples were scanned and analysed in metrology software to determine the trueness of the groups. Regions of interest were defined as the margins, intaglio surface and contact points. Areal surface roughness and print layer thickness were further analysed using a confocal laser scanning microscope. Results: The results indicate that there are clear differences between the investigated desktop (AON) and industrial (Lithoz) 3D printer. The 45° Lithoz group is the only sample group showing no significantly different results in trueness for all regions analysed compared to the milled group. Areal surface roughness analysis indicates that the print layers in the marginal regions are within clinically tolerable limits and surface characteristics. Conclusions: The printing orientation for zirconia crowns is critical to trueness, and differences are evident between different AM apparatuses. Considerations for design and orientation between different apparatuses should therefore be considered when utilising direct additive manufacturing processes. The areal surface roughness of the marginal regions is within acceptable clinical limits for all manufacturing processes and print orientations considered. Clinical significance: The materials and apparatuses for additive manufacturing of zirconia crowns are now clinically acceptable from the perspective of the trueness of a final crown for critical functional surfaces and areal surface roughness of the marginal regions. |
---|---|
Mesh-Begriff(e) | Zirconium/chemistry ; Crowns ; Printing, Three-Dimensional ; Surface Properties ; Computer-Aided Design ; Dental Prosthesis Design ; Humans ; Dental Materials/chemistry ; Microscopy, Confocal ; Molar ; Materials Testing ; Dental Marginal Adaptation |
Chemische Substanzen | Zirconium (C6V6S92N3C) ; zirconium oxide (S38N85C5G0) ; Dental Materials |
Sprache | Englisch |
Erscheinungsdatum | 2024-03-15 |
Erscheinungsland | England |
Dokumenttyp | Journal Article ; Comparative Study ; Research Support, Non-U.S. Gov't |
ZDB-ID | 186068-9 |
ISSN | 1879-176X ; 0300-5712 |
ISSN (online) | 1879-176X |
ISSN | 0300-5712 |
DOI | 10.1016/j.jdent.2024.104942 |
Datenquelle | MEDical Literature Analysis and Retrieval System OnLINE |
Volltext online
Zusatzmaterialien
Kategorien
Verfügbar in ZB MED Köln/Königswinter
Zs.A 860: Hefte anzeigen | Standort: Je nach Verfügbarkeit (siehe Angabe bei Bestand) bis Jg. 1994: Bestellungen von Artikeln über das Online-Bestellformular Jg. 1995 - 2021: Lesesall (1.OG) ab Jg. 2022: Lesesaal (EG) |
Über subito bestellen
Dieser Service ist kostenpflichtig (siehe Lieferbedingungen von subito). Bestellungen, die einen Artikel nebst Supplementary Material umfassen, werden grundsätzlich wie mehrfache Bestellungen bearbeitet. Gebühren fallen in diesen Fällen für jede einzelne Bestellung an.